搜索
All categories
Number of views:
1000
PLA-2N
Retail price
0.0
元
Market price
0.0
元
Product serial number
Category
Load Monitor
Quantity
-
+
Stock:
0
1
Product description
Parameters
■Specifications
| ●Power section and output section | |
| power supply | AC100V~240V 50 or 60HZ |
| Power consumption | 15W or less |
| Output contact | 1A、B（Emergency stop output） |
| Output contact capacity | 1A、B（Auxiliary output） |
| Below AC250V, below 5A cosφ=1 | |
| ●Checkout department | |
| Number of channels | 2 channels |
| Examination range | 100KN or more, punching capacity: up to 40,000KN |
| Repeatability | Relative punching capacity 0.5% / 1 channel |
| Using sensors | Deformation measurement type 4 bridge strain sensor |
| Recommended sensor： | |
| Republican Electric Company LUM-400A， | |
| HELM company HT-400 sensor | |
| ●Display department | |
| monitor | 1/2 inch, 7-segment red LED 5 digits (per 1ch) |
| ●other | |
| reserve | Use semiconductor memory Backup period: 10 years or more |
| Maximum speed | 1,000s.p.m. |
| Operating temperature range | -10℃~40℃ |
| Storage temperature range | -20℃~55℃ |
| Temperature | 10%~85% RH or less |
| (However, when the wet bulb temperature is below 29 °C, it should not condense) |
●Design and specifications due to product improvements are subject to change without notice.
■Features
● Master the load balance on the left and right sides of the press frame, understand the load center, eccentric load, etc., and help the grinding machine and the grinding time of the mold, and monitor the feed thrust and plate pressure change.
● As an overload protector for the mold, it is estimated that two sheets of stamping, mold damage, and grinding time of the mold, and monitoring of feed thrust and plate pressure change
● By understanding the reasonable load of the product. The press equipment can be easily selected.
●The checkout operation can be set to use the absolute value comparison (upper and lower limit settings) and the previous comparison (shake setting), so that a wider range of management can be implemented.
● The display uses an easily recognizable digital LED. In the strip reality, the load acting on the left and right is always displayed as a percentage
■The name of each part and its function
Scan the QR code to read on your phone
Previous
PLA-4N
Next
None
Product display
Photoelectric protector
Tonnage meter
Stamping error detecting device
Bottom dead point detection device
Mold height indicator
ddress: Block B, 8th Floor, Lekai Building, No. 660, Shangcheng Road, Pudong New Area, Shanghai
Tel：+86-(21)6888-9130
Fax：+86-(21)5836-1007
E-mail：sales@jtcs.cn
Web：www.jtcs.cn
Page Copyright © 2019 Jieti Precision Machinery (Shanghai) Co., Ltd. Powered by www.300.cn 沪ICP备案xxxxxxxx号
Page Copyright © 2019 Jieti Precision Machinery (Shanghai) Co., Ltd.